Anti-Cancer Effects of Carnosine—A Dipeptide Molecule

Background: Carnosine is a dipeptide molecule (β-alanyl-l-histidine) with anti-inflammatory, antioxidant, anti-glycation, and chelating properties. It is used in exercise physiology as a food supplement to increase performance; however, in vitro evidence suggests that carnosine may exhibit anti-cancer properties. Methods: In this study, we investigated the effect of carnosine on breast, ovarian, colon, and leukemic cancer cell proliferation. We further examined U937 promonocytic, human myeloid leukemia cell phenotype, gene expression, and cytokine secretion to determine if these are linked to carnosine’s anti-proliferative properties. Results: Carnosine (1) inhibits breast, ovarian, colon, and leukemic cancer cell proliferation; (2) upregulates expression of pro-inflammatory molecules; (3) modulates cytokine secretion; and (4) alters U937 differentiation and phenotype. Conclusion: These effects may have implications for a role for carnosine in anti-cancer therapy.     

Te溶剂Bridgman法CdMnTe晶体核辐射探测器的制备和表征

碲锰镉(CdMnTe)作为性能优异的室温核辐射探测器材料,可用于环境监测和工业无损检测领域。本文中采用Te溶剂Bridgman法生长In掺杂Cd_0.9Mn_0.1Te晶体,制备成10 mm×10 mm×2 mm大小的室温单平面探测器,研究了该探测器对²⁴¹Am@59.5 keV γ射线源的能谱响应。通过表征红外透过率、电阻率以及探测器能谱响应等参数,综合评定了探测器用CdMnTe晶体的质量、电学和探测器性能。结果表明,晶片的红外透过率均在55%以上,最好可达到60%。采用湿法钝化,100 V偏压下的漏电流由钝化前的9.48 nA降为钝化后的7.90 nA,钝化后的电阻率为2.832×10¹⁰ Ω·cm。在-400 V反向偏压下,CdMnTe探测器对²⁴¹Am@59.5 keV γ射线源的能量分辨率在钝化前后分别为13.53%和12.51%,钝化后的电子迁移率寿命积为1.049×10^-3 cm²/V。研究了探测器的能量分辨率随电压的变化特性,当偏压≤400 V时,探测器的能量分辨率主要由载流子的收集效率决定,而当偏压>400 V时,能量分辨率由漏电流决定。本文研究结果表明,Te溶剂Bridgman法生长的CdMnTe晶体质量较好,电阻率和电子迁移率寿命积满足探测器制备需求。     

Two novel Co (II)-coordination polymers as bifunctional materials for efficient photocatalytic degradation of dyes and electrocatalytic water oxidation

Two novel Co (II)- coordination polymers (CPs) based on 2,5-bis(4-carboxylpheny)-1,3,4-oxadiazole (bcpo), namely [Co/(bcpo)_0.5(tib)(H₂O)₂]_n (1) and [Co (bcpo)_0.5(bidpe)(H₂O)₂]_n (2) (tib = 1,3,5-tirs(1-imidazolyl)benzene, bidpe = 4,4′-bis (imidazolyl)diphenyl ether) have been synthesized under solvothermal conditions and characterized by powder X-ray diffraction (PXRD), single crystal X-ray diffraction, photochemistry as well as electrochemistry. The investigation of the photo-degradation methyl blue and methyl violet (MB, MV) properties of CPs 1–2 demonstrates that CP 1 shows great performance for the degradation of MB, and CP 2 could efficiently degrade MB/MV. Meanwhile, the possible photo-degradation mechanism has been proposed and explored. Simultaneously, electrochemistry studies show that both CPs 1 and 2 can catalyze water oxidation under an alkaline condition at the potential around 1.20 V vs. NHE with relatively low overpotential of 330–510 mV vs. NHE.     

A review of bioanalytical methods for chronic lymphocytic leukemia drugs and metabolites in biological matrices

Quantitation of drugs used for the treatment of chronic lymphocytic leukemia in various biological matrices during both pre-clinical and clinical developments is very important, often in routine therapeutic drug monitoring. The first developed methods for quantitation were traditionally done on LC in combination with either UV or fluorescence detection. However, the emergence of LC with mass spectrometry in tandem in early 1990s has revolutionized the quantitation as it has provided better sensitivity and selectivity within a shorter run time; therefore it has become the choice of method for the analysis of various drugs. In this article, an overview of various bioanalytical methods (HPLC or LC–MS/MS) for the quantification of drugs for the treatment of chronic lymphocytic leukemia, along with applicability of these methods, is given.     

Analyses of reaction rate data for the simple hydrolysis of acetic anhydride in the acetonitrile/water and acetone/water cosolvent systems using recently developed thermodynamic rate equations

This article presents reaction rate data for the simple hydrolysis of acetic anhydride in the acetonitrile/water and acetone/water cosolvent systems and regression analyses using recently developed thermodynamic rate equations that contain electrostatic and solvent-solute terms. The isomole fraction plots for these reaction systems are linear, and previous theoretical work has shown that the electrostatic term is negligible for such systems. On the other hand, the reaction rates are dependent upon the cosolvent mole fraction, indicating that the solvent-solute term, which is modeled empirically, is significant. The results of the analyses provide the foundation for a paradigm shift away from the emphasis on electrostatic effects to more tenable explanations of kinetic behavior in solvent systems.     

A detailed chemical kinetic model for the supercritical water oxidation of methylamine: The importance of imine formation

A detailed chemical kinetic model has been developed for supercritical water oxidation (SCWO) of methylamine, CH₃NH₂, providing insight into the intermediates and final products formed in this process as well as the dominant reaction pathways. The model was adapted from previous mechanisms, with a revision of the peroxyl radical chemistry to include imine formation, which has recently been identified as the dominant gas-phase pathway in amine oxidation. The developed model can reproduce previous experimental data on methylamine consumption and major product formation to reasonable accuracy, although with deficiencies in describing the induction time. Our simulations indicate that oxidation of the ^•CH₂NH₂ radical to methanimine, CH₂NH, is the major channel in methylamine SCWO, with subsequent hydrolysis of CH₂NH providing the experimentally observed reaction products ammonia and formaldehyde. Integral-averaged reaction rates were used to identify major reaction pathways, and a first-order sensitivity analysis indicated that the concentration of CH₃NH₂ is most sensitive to OH radical kinetics. Overall, this work clarifies the importance of imine chemistry in the oxidation of nitrogen-containing compounds and indicates that they are necessary to model these compounds in SCWO processes.     

Experimental and kinetic modeling study of the oxidation of cyclopentane and methylcyclopentane at atmospheric pressure

Cyclopentane and methylcyclopentane oxidation was investigated in a jet-stirred reactor at atmospheric pressure, over temperatures ranging from 900 to 1250 K, for fuel-lean, stoichiometric, and fuel-rich mixtures at a constant residence time of 70 ms. The initial mole fraction of both fuels was kept constant at 1000 ppm. The reactants were highly diluted by a flow of nitrogen to ensure thermal homogeneity. Samples of the reacting mixture were analyzed online and off-line by Fourier transform infrared spectroscopy and gas chromatography. A detailed kinetic mechanism consisting of 590 species involved in 3469 reactions was developed, and simulation results were compared to these new experimental data and previously reported ignition delays. Reaction pathways analysis as well as sensitivity analyses were performed to get insights into the differences observed during the oxidation process of cyclopentane and methylcyclopentane.     

An experimental and modeling study of the oxidation of n-heptane,ethylbenzene, and n-butylbenzene in a jet-stirred reactor at pressures up to 10 bar

In the context of better understanding pollutant formation from internal combustion engines, new experimental speciation data were obtained in a high-pressure jet-stirred reactor for the oxidation of three molecules, which are considered in surrogates of diesel fuel, n-heptane, ethylbenzene, and n-butylbenzene. These experiments were performed at pressures up to 10 bar, at temperatures ranging from 500 to 1 100 K, and for a residence time of 2 s. Based on results previously obtained close to the atmospheric pressure for the same molecules, the pressure effect on fuel conversion and product selectivity was discussed. In addition, for the three fuels, the experimental temperature dependence of species mole fractions was compared with simulations using recent literature models with generally a good agreement. For n-heptane, the obtained experimental data, at 10 bar for stoichiometric mixtures, included the temperature dependence of the mole fractions of the reactants and those of 21 products. Interestingly, the formation of species previously identified as C₇ diones was found significantly enhanced at 10 bar compared with lower pressures. The oxidation of ethyl- and n-butylbenzenes was investigated at 10 bar for equivalence ratios of 0.5, 1, and 2. The obtained experimental data included the temperature dependence of the mole fractions of the reactants and those of 13 products for the C₈ fuels and of 19 products for the C₁₀ one. For ethylbenzene under stoichiometric conditions, the pressure dependence (from 1 to 10 bar) of species mole fraction was also recorded and compared with simulations with more deviations obtained than for temperature dependence. For both aromatic reactants, a flow rate analysis was used to discuss the main pressure influence on product selectivities.     

Synthesis of Heat-resistant Polymers by Thiol–Ene Reaction of N-Allylmaleimide Copolymers Using Glycoluril Crosslinkers with Rigid Molecular Structures

We carried out the thermal curing of the copolymers of N-allylmaleimide (AMI) and 2-ethylhexyl acrylate (2EHA) using 1,3,4,6-tetra(2-mercaproethyl)glycoluril ( G1 ), 1,3,4,6-tetra(3-mercaptopropyl)glycoluril ( G2 ), 1,3,4,6-tetraallylglycoluril ( G3 ), triallylisocyanurate (TAIC), and pentaerythritol tetrakis(3-mercaptobutyrate) (PEMB) as the crosslinkers. Based on the results for the analysis of thiol–ene reactions monitored by IR spectroscopy, it was confirmed that the curing rate significantly depended on the combination of the used crosslinkers. The insoluble fraction after curing was more than 90% for the systems using the glycoluril crosslinkers, while the conversion of the allyl groups was suppressed due to the rigid structure of these crosslinkers. The heat resistance and the mechanical properties of the crosslinked polymers were investigated by thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and mechanical tensile tests. For the products cured using the glycoluril crosslinkers, the glass transition temperature (T_g) and the maximum temperature of thermal decomposition (T_max) were 54–59 °C and 395–409 °C, respectively, being higher than those for the cured product prepared with PEMB and TAIC as the conventional crosslinkers. The elasticity (75–139 MPa), the maximum strength (3.0–4.1 MPa), and the adhesion strength (6.7–10.7 MPa) for the polymers cured with the glycoluril crosslinkers, determined by the mechanical tensile and single lap-shear adhesion tests, were higher than those for cured materials produced with PEMB. Thus, the thermal and mechanical properties of the maleimide copolymers were efficiently enhanced by crosslinking using the rigid glycoluril compounds. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 923–931